Stainless steel 1.4307 / AISI 304L Acier Inoxydable
Rustfrit steel Acciai Inossidabli
Rostfrit steel Acero Inoxidable
W.Nr. 1.4307 | BS 304S31 | SIS 2333 |
AISI 304L | AFNOR Z7CN18-09 | JIS SUS304 |
X2CrNi18-9 | DIN 17740 1.4307 |
C max. 0,07 Cr 17,00 - 20,00 Ni 8,50 - 10,00 Mn 2,00 Si max. 1,00
1.4307 - AISI 304L is the standard for the austenitic grades of stainless steel due to its good corrosion resistance, ease of formability and fabrication coupeld with its aesthetic appearance in the polished, ground and brushed conditions. Since 1.4307 - AISI 304L is not resistant to intergranular corrosion
in the welded conditions, 1.4307 should rather be specified if welding of larger sections is required and no solution annealing treatment after welding can be performed. Surface conditions plays an important role in the corrosion resistance of this steel with polished surfaces exhibiting far superior corrosion resistance compared with rougher surfaces on the same material.
Stock range
1.4307 - AISI 304L round bar brightdrawn/ground tol. h9 acc. to DIN EN 10278 in lengths of 3 mtr.
Improved machinability
Sizes:
Ø 2,00 mm | Ø 7,00 mm | Ø 10,76 mm | Ø 15,00 mm | Ø 22,00 mm | Ø 33,00 mm | Ø 55,00 mm |
Ø 2,50 mm | Ø 7,12 mm | Ø 10,80 mm | Ø 16,00 mm | Ø 23,00 mm | Ø 33,25 mm | Ø 60,00 mm |
Ø 3,00 mm | Ø 7,15 mm | Ø 11,00 mm | Ø 17,00 mm | Ø 24,00 mm | Ø 34,00 mm | Ø 65,00 mm |
Ø 3,50 mm | Ø 7,50 mm | Ø 11,50 mm | Ø 17,70 mm | Ø 25,00 mm | Ø 35,00 mm | Ø 70,00 mm |
Ø 4,00 mm | Ø 8,00 mm | Ø 12,00 mm | Ø 18,00 mm | Ø 26,00 mm | Ø 36,00 mm | Ø 75,00 mm |
Ø 4,41 mm | Ø 8,50 mm | Ø 12,50 mm | Ø 18,25 mm | Ø 27,00 mm | Ø 38,00 mm | Ø 76,00 mm |
Ø 4,50 mm | Ø 8,95 mm | Ø 12,60 mm | Ø 18,27 mm | Ø 27,60 mm | Ø 40,00 mm | Ø 80,00 mm |
Ø 5,00 mm | Ø 9,00 mm | Ø 12,63 mm | Ø 19,00 mm | Ø 28,00 mm | Ø 42,00 mm | Ø 85,00 mm |
Ø 5,28 mm | Ø 9,50 mm | Ø 12,65 mm | Ø 20,00 mm | Ø 29,00 mm | Ø 45,00 mm | Ø 90,00 mm |
Ø 5,30 mm | Ø 10,00 mm | Ø 13,00 mm | Ø 21,00 mm | Ø 30,00 mm | Ø 46,00 mm | Ø 95,00 mm |
Ø 5,50 mm | Ø 10,35 mm | Ø 13,70 mm | Ø 21,30 mm | Ø 30,60 mm | Ø 48,00 mm | Ø 100,00 mm |
Ø 6,00 mm | Ø 10,50 mm | Ø 14,00 mm | Ø 21,90 mm | Ø 31,00 mm | Ø 50,00 mm | |
Ø 6,50 mm | Ø 10,73 mm | Ø 14,60 mm | Ø 21,95 mm | Ø 32,00 mm | Ø 52,00 mm |
1.4307 - AISI 304L round bar brightdrawn/ground tol. h9 acc. to DIN EN 10278 in lengths of 6 mtr.
Improved machinability
Sizes:
Ø 6,00 mm | Ø 15,00 mm | Ø 25,00 mm | Ø 45,00 mm | Ø 90,00 mm |
Ø 8,00 mm | Ø 16,00 mm | Ø 30,00 mm | Ø 50,00 mm | Ø 100,00 mm |
Ø 10,00 mm | Ø 18,00 mm | Ø 32,00 mm | Ø 60,00 mm | |
Ø 12,00 mm | Ø 20,00 mm | Ø 35,00 mm | Ø 70,00 mm | |
Ø 14,00 mm | Ø 22,00 mm | Ø 40,00 mm | Ø 80,00 mm |
1.4307 - AISI 304L round bar ground tol. h8 acc. to DIN EN 10278 in lengths of 3 mtr
Improved machinability
Sizes:
Ø 5,00 mm | Ø 12,00 mm | Ø 16,00 mm | Ø 25,00 mm |
Ø 6,00 mm | Ø 13,00 mm | Ø 18,00 mm | Ø 30,00 mm |
Ø 8,00 mm | Ø 14,00 mm | Ø 20,00 mm | Ø 35,00 mm |
Ø 10,00 mm | Ø 15,00 mm | Ø 22,00 mm | Ø 40,00 mm |
1.4307 - AISI 304L round bar ground tol. h6 acc. to DIN EN 10278 in lengths of 3 mtr
Improved machinability
Sizes:
Ø 6,00 mm | Ø 14,00 mm | Ø 20,00 mm | Ø 40,00 mm | Ø 80,00 mm |
Ø 8,00 mm | Ø 15,00 mm | Ø 25,00 mm | Ø 50,00 mm | Ø 90,00 mm |
Ø 10,00 mm | Ø 16,00 mm | Ø 30,00 mm | Ø 60,00 mm | Ø 100,00 mm |
Ø 12,00 mm | Ø 18,00 mm | Ø 35,00 mm | Ø 70,00 mm |
1.4307 - AISI 304L round bar bright acc. to DIN EN 10278, ground K240 in lengths of 3 mtr or 6 mtr
Sizes:
Ø 8,00 mm | Ø 14,00 mm | Ø 18,00 mm |
Ø 10,00 mm | Ø 15,00 mm | Ø 20,00 mm |
Ø 12,00 mm | Ø 16,00 mm | Ø 25,00 mm |
It is also possible to produce special sizes and lengths in a short deliverytime.
1.4307 - AISI 304L round bar hotrolled / forged, peeled / turned acc. DIN EN 10060 ( formerly DIN 1013 ), long 4-6 mtr
Sizes:
Ø 20,00 mm | Ø 42,00 mm | Ø 95,00 mm | Ø 150,00 mm | Ø 210,00 mm | Ø 310,00 mm | Ø 410,00 mm |
Ø 22,00 mm | Ø 45,00 mm | Ø 100,00 mm | Ø 155,00 mm | Ø 220,00 mm | Ø 320,00 mm | Ø 425,00 mm |
Ø 24,00 mm | Ø 50,00 mm | Ø 105,00 mm | Ø 160,00 mm | Ø 230,00 mm | Ø 325,00 mm | Ø 450,00 mm |
Ø 25,00 mm | Ø 55,00 mm | Ø 110,00 mm | Ø 165,00 mm | Ø 240,00 mm | Ø 330,00 mm | Ø 475,00 mm |
Ø 28,00 mm | Ø 60,00 mm | Ø 115,00 mm | Ø 170,00 mm | Ø 250,00 mm | Ø 340,00 mm | Ø 500,00 mm |
Ø 30,00 mm | Ø 65,00 mm | Ø 120,00 mm | Ø 175,00 mm | Ø 260,00 mm | Ø 350,00 mm | Ø 525,00 mm |
Ø 32,00 mm | Ø 70,00 mm | Ø 125,00 mm | Ø 180,00 mm | Ø 270,00 mm | Ø 360,00 mm | Ø 550,00 mm |
Ø 35,00 mm | Ø 75,00 mm | Ø 130,00 mm | Ø 185,00 mm | Ø 280,00 mm | Ø 370,00 mm | Ø 575,00 mm |
Ø 36,00 mm | Ø 80,00 mm | Ø 135,00 mm | Ø 190,00 mm | Ø 285,00 mm | Ø 375,00 mm | |
Ø 38,00 mm | Ø 85,00 mm | Ø 140,00 mm | Ø 195,00 mm | Ø 290,00 mm | Ø 380,00 mm | |
Ø 40,00 mm | Ø 90,00 mm | Ø 145,00 mm | Ø 200,00 mm | Ø 300,00 mm | Ø 400,00 mm |
1.4307 - AISI 304L Forgings
Forgings acc. to drawings, bars, discs and rings on request.
1.4307 - AISI 304L Blocks / flats, sawn from forged primematerial
Sizes on request.
1.4307 - AISI 304L hollow bars hotrolled - pickled, long 2-7 mtr
Sizes:
32 x 16 mm | 60 x 40 mm | 85 x 45 mm | 118 x 80 mm | 160 x 122 mm | 212 x 170 mm |
32 x 20 mm | 60 x 44 mm | 90 x 50 mm | 118 x 90 mm | 160 x 132 mm | 212 x 180 mm |
36 x 16 mm | 60 x 45 mm | 90 x 56 mm | 125 x 71 mm | 170 x 106 mm | 224 x 140 mm |
36 x 20 mm | 63 x 32 mm | 90 x 63 mm | 125 x 80 mm | 170 x 118 mm | 224 x 160 mm |
36 x 25 mm | 63 x 36 mm | 90 x 71 mm | 125 x 90 mm | 170 x 130 mm | 224 x 170 mm |
40 x 20 mm | 63 x 40 mm | 95 x 50 mm | 125 x 100 mm | 170 x 140 mm | 224 x 180 mm |
40 x 25 mm | 63 x 45 mm | 95 x 67 mm | 132 x 71 mm | 180 x 100 mm | 236 x 150 mm |
40 x 28 mm | 63 x 50 mm | 100 x 56 mm | 132 x 80 mm | 180 x 125 mm | 236 x 190 mm |
45 x 20 mm | 70 x 50 mm | 100 x 63 mm | 132 x 90 mm | 180 x 130 mm | 240 x 170 mm |
45 x 25 mm | 71 x 36 mm | 100 x 71 mm | 132 x 106 mm | 180 x 140 mm | 250 x 200 mm |
45 x 28 mm | 71 x 40 mm | 100 x 80 mm | 140 x 80 mm | 180 x 150 mm | 300 x 200 mm |
45 x 32 mm | 71 x 45 mm | 106 x 56 mm | 140 x 90 mm | 190 x 106 mm | 340 x 200 mm |
50 x 25 mm | 71 x 56 mm | 106 x 63 mm | 140 x 100 mm | 190 x 123 mm | 380 x 230 mm |
50 x 28 mm | 75 x 40 mm | 106 x 71 mm | 140 x 106 mm | 190 x 140 mm | 400 x 300 mm |
50 x 32 mm | 75 x 50 mm | 106 x 80 mm | 140 x 112 mm | 190 x 150 mm | 420 x 300 mm |
50 x 36 mm | 75 x 56 mm | 106 x 90 mm | 150 x 80 mm | 190 x 160 mm | |
50 x 40 mm | 75 x 60 mm | 112 x 63 mm | 150 x 95 mm | 200 x 140 mm | |
56 x 20 mm | 76 x 58 mm | 112 x 71 mm | 150 x 106 mm | 200 x 150 mm | |
56 x 25 mm | 80 x 40 mm | 112 x 80 mm | 150 x 125 mm | 200 x 160 mm | |
56 x 28 mm | 80 x 45 mm | 112 x 90 mm | 160 x 90 mm | 200 x 170 mm | |
56 x 30 mm | 80 x 50 mm | 118 x 63 mm | 160 x 112 mm | 212 x 130 mm | |
56 x 40 mm | 80 x 63 mm | 118 x 71 mm | 160 x 120 mm | 212 x 150 mm |
From roundbars turned and drilled on request.
1.4307 - AISI 304L square bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 176 ) long 3 mtr
Improved machinability
Sizes:
Ø 4,00 mm | Ø 8,00 mm | Ø 12,00 mm | Ø 16,00 mm | Ø 24,00 mm | Ø 35,00 mm | Ø 55,00 mm | Ø 100,00 mm |
Ø 5,00 mm | Ø 9,00 mm | Ø 13,00 mm | Ø 18,00 mm | Ø 25,00 mm | Ø 40,00 mm | Ø 60,00 mm | |
Ø 6,00 mm | Ø 10,00 mm | Ø 14,00 mm | Ø 20,00 mm | Ø 30,00 mm | Ø 45,00 mm | Ø 70,00 mm | |
Ø 7,00 mm | Ø 11,00 mm | Ø 15,00 mm | Ø 22,00 mm | Ø 32,00 mm | Ø 50,00 mm | Ø 80,00 mm |
1.4307 - AISI 304L hexagon bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 176 ) long 3 mtr
Improved machinability
Sizes:
4,00 mm | 9,00 mm | 14,00 mm | 22,00 mm | 36,00 mm | 60,00 mm |
5,00 mm | 10,00 mm | 15,00 mm | 24,00 mm | 41,00 mm | 65,00 mm |
6,00 mm | 11,00 mm | 16,00 mm | 27,00 mm | 46,00 mm | |
7,00 mm | 12,00 mm | 17,00 mm | 30,00 mm | 50,00 mm | |
8,00 mm | 13,00 mm | 19,00 mm | 32,00 mm | 55,00 mm |
1.4307 - AISI 304L square bars hotrolled and pickled tolerance DIN EN 10059 ( formerly DIN 1014 ) long 4-6 mtr
Sizes: 15 mm - 150 mm
1.4307 - AISI 304L flat bars brightdrawn tolerance h11 DIN EN 10278 ( formerly DIN 174 ) long 3 mtr
Sizes: 8 x 4 mm - 160 x 10 mm
1.4307 - AISI 304L flat bars hotrolled and pickled tolerance DIN EN 10058 ( formerly DIN 1017 ) long 4-6 mtr
Sizes: 10 x 4 mm - 200 x 40 mm
1.4307 - AISI 304L flat bars cut /slitted from sheets tolerance DIN EN 10058 ( formerly DIN 1017 ) long 4-6 mtr
Sizes: 10 x 3 mm - 300 x 12 mm
Flat bars grinded K 240/320 from stock possible.
1.4307 - AISI 304L Angle bars cold drawn / cold rolled tolerance DIN 59370 resp. DIN 1022
Sizes: 10 x 10 x 2 mm - 60 x 60 x 6 mm
1.4307 - AISI 304L Angle bars equal hotrolled and pickled tolerance DIN 1028 long 6 mtr
Sizes: 15 x 15 x 3 mm - 180 x 180 x 20 mm
1.4307 - AISI 304L Angle bars unequal hotrolled and pickled tolerance DIN 1029 long 6 mtr
Sizes: 20 x 10 x 3 mm - 200 x 100 x 12 mm
1.4307 - AISI 304L T-profiles hotrolled long 6 mtr
Sizes: T 20 mm - T 120 mm
1.4307 - AISI 304L U-profiles hotrolled long 6 mtr
Sizes: U 20 - U 200
1.4307 - AISI 304L IPB-IPE -profiles hotrolled long 6 mtr
Sizes:
IPE 80 - IPE 300
IPB 100 - IPB 300
We also have the ability to produce special sizes short term.
1.4307 - AISI 304L Sheets/Plates hotrolled Finish 1
Sizes:
Thickness 3 mm - 150 mm
Width 1000 / 1250 / 1500 / 2000 / 2500 mm
Length 2000 / 2500 / 3000 / 6000 / 6000 tot max. 8000 mm
1.4307 - AISI 304L sheets / plates plasma cutting / water-jet cutting / laser-cutting / sawn cuttings
Certificates: EN 10204 / 3.1
Leave your telephone number here, we will call you back as soon as possible.
You can call us at +31 (0) 186 651004 or send an email to info@steelinox.nl