Stainless steel 1.4034 / AISI 420
Rustfrit steel
Rostfrit steel
| W.Nr. 1.4034 | BS 420S45 | SIS |
| AISI 420 | AFNOR Z44C14/Z38C13 | JIS |
| X46Cr13 | DIN 17740 1.4034 |
C 0,43 - 0,50 Cr 12,50 - 14,50 S < 0,030
1.4034 is characterised by its high hardenability in conjunction with good corrosion resistance in moderately corrosive environments. Due to its higher carbon content, it is more hardenable than 1.4031. It is used in the quenched and tempered condition and due to its high hardness, is ideally suited for the production of cutting tools and the production of roller bearings.
Stock range
1.4034 - AISI 420 round bar brightdrawn/ground tol. h9 acc. to DIN EN 10278 in lengths of 3 mtr
Sizes:
| Ø 5,00 mm | Ø 10,00 mm | Ø 15,00 mm | Ø 22,00 mm | Ø 30,00 mm | Ø 42,00 mm | Ø 65,00 mm |
| Ø 6,00 mm | Ø 11,00 mm | Ø 16,00 mm | Ø 24,00 mm | Ø 32,00 mm | Ø 45,00 mm | |
| Ø 7,00 mm | Ø 12,00 mm | Ø 18,00 mm | Ø 25,00 mm | Ø 35,00 mm | Ø 50,00 mm | |
Ø 8,00 mm | Ø 13,00 mm | Ø 20,00 mm | Ø 26,00 mm | Ø 36,00 mm | Ø 55,00 mm | |
| Ø 9,00 mm | Ø 14,00 mm | Ø 21,00 mm | Ø 28,00 mm | Ø 40,00 mm | Ø 60,00 mm |
1.4034 - AISI 420 round bar hotrolled / forged, peeled / turned acc. DIN EN 10060 ( formerly DIN 1013 ), long 4-6 mtr
Sizes:
| Ø 30,00 mm | Ø 60,00 mm | Ø 90,00 mm | Ø 140,00 mm | Ø 190,00 mm | Ø 280,00 mm |
| Ø 35,00 mm | Ø 65,00 mm | Ø 95,00 mm | Ø 150,00 mm | Ø 200,00 mm | Ø 290,00 mm |
| Ø 40,00 mm | Ø 70,00 mm | Ø 100,00 mm | Ø 160,00 mm | Ø 220,00 mm | Ø 300,00 mm |
Ø 45,00 mm | Ø 75,00 mm | Ø 110,00 mm | Ø 165,00 mm | Ø 240,00 mm | Ø 325,00 mm |
| Ø 50,00 mm | Ø 80,00 mm | Ø 120,00 mm | Ø 170,00 mm | Ø 250,00 mm | Ø 330,00 mm |
Ø 55,00 mm | Ø 85,00 mm | Ø 130,00 mm | Ø 180,00 mm | Ø 275,00 mm | Ø 350,00 mm |
Brightbars only in full lengths, not cutted.
Peeled material also possible to in fixlengths.
1.4034 - AISI 420 Forgings
Forgings acc. to drawings, bars, discs and rings on request.
1.4034 - AISI 420 Blocks / flat, sawn from forged primematerial
Sizes on request.
1.4034 - AISI 420 Sheets/Plates hotrolled finish 1
Sizes: 1000 x 2000 mm / 1250 x 2000 mm / 1250 x 2500 mm
Thickness:
| 3,00 mm | 5,50 mm | 10,00 mm |
| 3,30 mm | 6,00 mm | |
| 3,50 mm | 6,50 mm | |
| 4,00 mm | 7,00 mm | |
| 4,50 mm | 7,50 mm | |
| 5,00 mm | 8,00 mm |
Certificates: EN 10204 / 3.1
Leave your telephone number here, we will call you back as soon as possible.
You can call us at +31 (0) 186 651004 or send an email to info@steelinox.nl